In the intricate world of 5G networks, the Random Access Channel (RACH) serves as a vital gateway for User Equipment (UE) to establish initial communication with the network. While RACH is commonly associated with UE transitions from idle mode to…
SSB Burst is contained inside a 5ms time frame and up to a max of 64 SSB beams are transmitted within the 5ms time period. A radio frame is of 10ms and the SSB burst can happen in the first…
In the 5G-NR RACH process, the gNB’s ability to configure Contention Free RACH to UE hinges on transmitting specific dedicated information. This includes the SSB index, PRACH Preamble, and RACH Occasion. For CFRA RACH to be initiated, the network must…
MIB is mandatory system information that is broadcasted by the gNB at a set periodicity. During the initial cell selection procedure, UE assumes that the SSB is broadcasted every 20ms by the gNB. UE gets MIB by decoding the PBCH…
Reading specs from 3GPP can be sometimes very difficult as there are so many specs and navigating through each of them can be a daunting task and there is no definitive and clear guide on how to use the specs…
There are certain messages that 3GPP has defined that can be sent prior to Access stratum security activation and some messages which should not be sent without integrity protection or unciphered after AS security activation Below are the list of…
If you are working in Wireless communications for modem/device or RAN industry Have you ever wondered when the 5G ICON is displayed on the mobile? A UE will display 5G PS ICON when it is in the SA Coverage area…
In Release-16, 3GPP Introduced a new Handover procedure that allows UE to decide to perform handover when certain conditions are met, In the Legacy handover procedure network was in charge of making the decision whether the handover should be performed…