Share & Export
3GPP TS 38.211 / TS 38.213 Rel-17 Standards Mapper
5G NR RE Grid & Channel Mapper
Interactive 5G NR resource grid mapper with 3GPP TS 38.213 advanced TDD slot & symbol configuration.
Duplex & Carrier Controls
3GPP TS 38.213 TDD Slot & Symbol Pattern ConfigurationPeriodicity: 10 Slots
SCS Numerology
Visible Carrier PRBs
PDSCH Data & DMRS
PUSCH Data & DMRS
PUCCH Control
Grid Viewport (TDD Mode) | Slot #0 (DL) | 24 PRBs (288 Subcarriers × 14 Symbols)
Viewport Zoom:120%
Channel Legend:
PDCCH / CORESET
PDSCH DM-RS
PDSCH Data
PUSCH Data
PUSCH DM-RS
PUCCH
SSB PSS
SSB SSS
SSB PBCH
Collision
10-Slot Frame Window Navigator (Slots #0 to #9)
Selected RE Inspector
Click any Resource Element (RE) on the grid canvas to inspect coordinates, ownership, and 3GPP citations.
RE Accounting Breakdown
PDSCH / PUSCH Data REs2,112
DM-RS REs (DL/UL)144
Control REs (PDCCH/PUCCH)576
SSB REs960
CSI-RS REs48
N_RE per PRB (Active Data Channel):88.0 REs
Frequently Asked Questions: 5G NR Resource Grid & Channel Allocation
01What is SSB symbol rate-matching and why is it critical?
- SSB Footprint (TS 38.211 Sec 7.4.3.1): An SS/PBCH Block spans 20 PRBs (240 subcarriers) across 4 consecutive OFDM symbols.
- SSB Component Signals: Contains PSS (Symbol 0), SSS (Symbol 2), PBCH data (Symbols 1–3), and PBCH DM-RS.
- Rate-Matching Action: When SSB Rate-Matching is
ON, gNodeBs route PDSCH data around SSB symbols to prevent fatal collisions. - Collision Mode: When Rate-Matching is
OFF, data overlapping SSB turns red (COLLISION) to visualize spec violations.
02What do K0, K1, and K2 time-domain slot offsets represent?
- K0 (PDCCH DCI → PDSCH): Slot offset for Downlink data. PDSCH is transmitted in slot
n + K0relative to DCI slotn(TS 38.214 Table 5.1.2.1.1-1). - K1 (PDSCH → PUCCH HARQ): Slot offset for HARQ-ACK feedback. PUCCH transmits ACK/NACK in slot
n + K1following PDSCH slotn. - K2 (PDCCH DCI → PUSCH): Slot offset for Uplink data grants. PUSCH is transmitted in slot
n + K2relative to UL Grant DCI slotn.
03How are Scheduling Request (SR) parameters configured in RRC/MAC?
- SR Periodicity (periodicityAndOffset): Defines slot intervals (
sl1tosl80) where a UE can send an SR on PUCCH Format 0/1. - sr-ProhibitTimer: Minimum timer (
1msto128ms) preventing back-to-back SR flooding (TS 38.321). - sr-TransMax: Max SR retransmissions (
n4ton64) before resetting MAC and initiating RACH procedure. - phy-PriorityIndex (Rel-16): Priority levels (
p0for Best Effort vsp1for Ultra-Reliable Low-Latency URLLC).
Related Technical Articles & Tools
tool5g nr
5G NR CSI-RS & CSI Reporting Visualizer
post5g nr
Getting Started with NTN (Non-Terrestrial Networks) — Beginner's Guide
post5g nr
SMTC in 5G NR — Detailed Guide (SMTC1, SMTC2, SMTC-LP, SMTC3, SMTC4)
post5g nr
Beam Failure Detection and Recovery Procedure in 5G NR
post5g nr