NR-NR Dual Connectivity (NR-DC)
NR-DC is the variant when the UE is connected to one gNB that acts as a Master Node and one gNB that acts as a Secondary Node. The Master Node is connected to 5GC while the Secondary Node is connected…
5G-NR-Release-16 POSTS
NR-DC is the variant when the UE is connected to one gNB that acts as a Master Node and one gNB that acts as a Secondary Node. The Master Node is connected to 5GC while the Secondary Node is connected…
5G NR UE Timers and Constants Below is the list of all the UE Timers and Constants in the 5G NR. All descriptions have been copied from the spec and have not been modified to keep the original information handy…
During the NR Registration procedure, UE will include its support for Dual Active Protocol stack (DAPS) Handover in the UE Capability message. If there is no support for DAPS from UE, then the network will not configure DAPS handover for…
During the NR Registration procedure, UE will include its support for Dual Active Protocol stack (DAPS) Handover in the UE Capability message. If there is no support for DAPS from UE, then the network will not configure DAPS handover for…
IN 5G-NR UE’s operating in RRC_Connected mode can be categorized into two types of mobilities Cell level mobility and Beam Level Mobility which are network controlled procedures. In Release-15 3GPP has introduced the inter-gNB handover procedure which is similar to…
In Release-16, 3GPP Introduced a new Handover procedure that allows UE to decide to perform handover when certain conditions are met, In the Legacy handover procedure network was in charge of making the decision whether the handover should be performed…
In Earlier versions of NR Releases prior to R-16, There was only one type of RACH procedure which is kind of similar to the LTE RACH procedure also known as the 4-Step RACH procedure. In the Release-16 NR version, 3GPP…